The "CE" mark is a safety certification mark and is regarded as a passport for manufacturers to open and enter the European market. CE stands for Conformite Europeenne. In the EU market, the "CE" mark is a compulsory certification mark. Whether it is a product produced by an enterprise within the EU or a product produced in other countries, if it is to be freely circulated in the EU market, the "CE" mark must be affixed to indicate that the product is Comply with the basic requirements of the EU Directive on New Approaches to Technical Harmonization and Standardization. This is a mandatory requirement for products under EU law.
CE certification provides a unified technical specification for the trade of products from various countries in the European market and simplifies the trade procedure. To enter the European Union and the European Free Trade Area, the products of any country must be CE certified, and the CE mark should be affixed to the product. Therefore, CE certification is a passport for products to enter the European Union and European Free Trade Zone countries.
Plug CE certification testing standard
EN 50075: 1990 "Specification for 2.5A, 250V non-rewirable bipolar flat plugs with flexible cord for the connection of Class II equipment for household and similar purposes"
The EN 50075: 1990 standard applies to flat, non-rewirable, two-pole plugs that are not grounded and have a rated voltage of 250V ac and a rated current of 2.5A. They are supplied with a power cord for connection to Class II equipment for domestic and similar use and have no special protection against water ingress and are intended for indoor use.
Plug CE certification test items
1. Label, plug size measurement;
2. Anti-shock protection and structure;
3. Insulation resistance and electrical strength;
4. Moisture-proof, flexible wire and its connection;
5. Mechanical strength, heat resistance and aging resistance;
6. Current-carrying components and connections;
7. Creepage distance, electrical clearance and penetration of solid insulation;
8. The insulating material is exceptionally heat-resistant and fire-resistant.
Information to be prepared for plug CE certification application
1. Product structure and dimension drawing;
2. Product decomposition diagram;
3. Circuit diagram;
4. Circuit board wiring diagram;
5. Parts list (including part model and file number);
6. Product manual (requires a brief description of product parameters and functions);
7. Product photos (finished product photos and internal photos);
8. Product label (or Label drawing).
Plug CE certification process
1. Project application - submit a testing application to the ZRLK testing agency.
2. Data preparation - According to the standard requirements, the enterprise prepares relevant certification documents.
3. Product testing - the company sends the samples to be tested to the laboratory for testing.
4. Preparation of reports - certified engineers prepare reports based on qualified test data.
5. Submit for review - the engineer will review the complete report.
6. Issuing a certificate - CE certification will be issued after the report is reviewed and verified.
Please contact our company ZRLK for CE certification of plugs. We will provide you with professional and efficient testing and certification services with favorable prices and considerate service. If you provide us with product pictures and specifications, we will give you corresponding cycles, quotations and specific solutions according to your products. You are welcome to inquire!
